Specification for Use of Burning Oil in Asphalt Mixing Plants

Specification for Use of Burning Oil in Asphalt Mixing Plants

Fuel oil is used when the asphalt mixing plant is running, but the fuel oil is divided into different grades. How to use it properly is the key to grasp. The following are the specifications for the use of burning oil in asphalt mixing plants, which should be followed accordingly.

According to different viscosity grades, combustion oil can be divided into two types: light oil and heavy oil. Among them, light oil can obtain a good atomization effect without heating, and heavy oil must be heated before use to ensure that its viscosity meets the allowable range of equipment. . It’s necessary that not only grasp the characteristics of oil products, but also inspect, adjust and clean the device to avoid fire or oil contamination clogging.

In addition, after the work is completed, the burner switch should be turned off first before heavy oil heating. If it is required to stop for a long time or cold weather is coming, just switch the oil circuit valve and clean the oil circuit with light oil, otherwise it will cause the oil circuit to be unsmooth or difficult to ignite, which is very detrimental to the operation and running of the entire asphalt mixing plant.